Miniland Chefy 6 Children's Combine Harvester 6-1

Chefy is an all-in-one kitchen appliance with a compact design, amazing features and versatile capabilities. It also comes with a healthy baby food recipe book that can be downloaded from the eMyBaby app. Features of the device:

1. Heats baby food in bottles and jars.

2. Sterilizes the dishes.

3. Cooks food on steam.

4. Keeps the baby's bottle and baby's temperature.

5. Crushes food.

6. Seizes food.

Ideal for thawing and heating breast milk. During this process, the vitamins and nutrients of breast milk are not lost. Performs effective sterilization with natural steam, does not require the addition of chemical substances. In addition, Chefy will always let you know how many minutes are left until the sterilization is complete. The device is very easy to disassemble and clean. Includes carrying case and storage bag. Warranty - 2 years.

Main electrical food processor/unit, cup with dosing units, sterilizer lid, set of meshes, instructions for use, quick guide.

Heating baby bottles and jars:

1. Pour the amount of water indicated in the tables in this chapter into the water tank of the appliance, depending on the temperature and volume of the bottle or jar. Use the measuring cup provided to measure the amount of water added. Hard water can cause sediment to form in the water tank. Therefore, we recommend using filtered water.

2. Place the sterilization tray inside the water tank and place the bottle on the sterilization tray. Turn on the appliance by pressing the on/off button.

3. Press the heating/sterilization button. The display will show the pre-programmed value ‘5’, indicating a 5-minute countdown. The heating process will begin in a few seconds.

Sterilization:

1. To sterilize, pour 60 milliliters of water into the reservoir. Use the measuring cup included with the device to measure the amount of water added.

2. Place the sterilization stand inside the reservoir and place the bottle (completely empty and with the mouth down) on the sterilization stand, then close the sterilization cap on the reservoir, turn on the device by pressing the on/off button.

3. Press the heating/sterilization button. The pre-programmed value ‘5’ will be displayed on the display.

4. Press the “Increase” + button several times until the value ‘8’ is displayed. The sterilization process will begin after a few seconds. After an 8-minute sterilization cycle, the bottle and accessories will be sterilized.

5. We recommend that you allow the appliance to cool down for 3 minutes after the sterilization cycle is complete.

Attention: Before starting the sterilization process, it is essential that the bottles and accessories to be sterilized are completely empty, thoroughly washed and dried.

Steaming vegetables:

1. To steam vegetables, pour 230 ml of water into the reservoir and close the reservoir lid.

2. Cut the vegetables to be steamed into cubes of approximately 2 cm, place them inside the jug and close the jug lid.

3. Place the jug on the electric heating block of the appliance so that the jug is on top and turn the jug clockwise until the jug handle is facing forward, turn on the appliance using the on/off button.

4. Press the steam button. The display will show the pre-programmed value ‘25’; the appliance will start working after a few seconds.

Important: The steaming time is based on ½ kg of vegetables. Depending on the ripeness of the vegetables, the cooking time may vary. For best results, it is advisable to cut the vegetables into pieces.

Chopping function:

1. Place the sharp blade in the blender jar, place the “fresh” or prepared food and close the lid.

2. Insert the jar into the appliance, turn it clockwise until the handle is facing the front.

3. Press the chopping button.

Note:

1. If the food does not reach the desired consistency after chopping, repeat the cycle again.

2. Remove the jar from the appliance, then tilt the head and transfer the food to a plate.

Maintaining the temperature:

1. To maintain the current temperature, place the sterilizing stand inside the reservoir and place the bottle or jar in the center of the sterilizing stand inside the reservoir.

2. Pour water into the reservoir until it reaches the level of the milk or food in the bottle or jar. Note that the maximum water level inside the reservoir should be 1 cm lower than the maximum height of the reservoir.

3. Turn on the device using the on/off button, press the “Defrost”/“Keep warm” button. The pre-programmed data ‘37’ will be displayed on the display.

4. The programmed temperature is 37ºC, but it can be adjusted between 35ºC and 50ºC using the “Decrease” or “Increase” + buttons.

Defrosting:

1. To defrost a milk or cereal bottle or jar, place the sterilization stand inside the reservoir and place the bottle or jar in the center of the sterilization stand inside the reservoir.

2. Pour water into the reservoir until it reaches the level of the milk or food in the bottle or jar. Note that the maximum water level inside the reservoir should be 1 cm lower than the maximum height of the reservoir.

3. Turn on the device using the on/off button, press the “Defrost”/“Keep Warm” button. The pre-programmed value ‘37’ will be displayed on the screen.

4. After a few seconds, the appliance will begin defrosting the inserted bottle/jar; Warning: The defrosting process will continue until you turn off the appliance. For best results, it is recommended to stir constantly.