FILIKO, 3D pen set

The first 3D pen with a metal motor and more power than any previous model. As well as an even more refined ergonomic design, the makers have made it easier for children to hold and use the pen. Plastic case + LCD screen (temperature indicator). Power supply: power adapter + TYPE C USB cable. It works very quietly. Makes molten material very smooth. The 3D pen allows every child to turn any picture they draw or draw into a 3D toy. The pen needs PLA consumables to work; which is included in the same set (10 different colors of PLA, each 5 meters long. 50 meters in total). PLA is 100% non-toxic and biodegradable. . The pen has buttons with the following functions: an automatic button for placing consumables in the pen, a button for adjusting the speed of releasing consumables from the pen (it has 3 speeds) and an automatic button for removing consumables from the pen. The length of the pen is 18.5 cm. Tip diameter: 0.7 mm. Pen weight: 50g+-3g.
The recommended age for playing with a 3D pen is from 5 years. Country of manufacture - China. The product is made of safe materials and the process of playing is also safe. Recommended playing time is 3 hours maximum. Certified with the following certificates CE/FCC/ROHS.

• When plugged into a power source, you'll see a red light next to the screen, which means the pen has connected to a power source.
• When you turn on the pen, press the M button, select PLA as the working material on the screen, and press M again.
• When the blue light turns on, you can start using the pen
• Bring the consumable to the PLA consumable holder and simultaneously press the PLA material loading button with your finger (under no circumstances use force to insert the material into the pen, do not feed the material by hand.
• You can adjust the speed of the release of the material through the speed control button M on the pen
• If you want to change the color in the pen, you press the material release button with your finger and the material starts to pop out. It is not allowed to grab the material and remove it by hand. This will cause damage to the pen.
• When you are done playing, be sure to remove the material from the pen with the help of the button. It is not allowed to leave the material in the pen.
• When you want to put a consumable in the pen that was already in the pen and remove it, be sure to cut the end of the consumable with scissors and bring it to the consumable holder. The pen will not add color if the head of the material is damaged (melted, misshapen, stringy). Do not touch the tip of the pen - it is very hot when the pen is on or off. If you are used to playing with the pen, do not keep the pen in a hot state. Wait for it to cool. The child must be under the supervision of a parent. Remember the 3D pen is an electric toy and should not be near water. Drawing with a pen on the body is not allowed. May cause burns. Recommended playing time is maximum 3 hours.